Home> Blog> The largest evaporative cooling unit in China completes the stator magnetization test

The largest evaporative cooling unit in China completes the stator magnetization test

November 06, 2022
On September 24, China's largest evaporative cooling unit, the No. 27 unit of the Three Gorges Underground Power Station, passed a Stator Core magnetization test.

The key component of the evaporative cooling unit, which is different from the air-cooled and water-cooled units, is the manufacture and installation of the unit stator cooling system. The Three Gorges Underground Power Station has a total of six 700,000 kilowatts of hydro-generator units, two air-cooled units (No. 32 and No. 31) manufactured by Harbin Electric and two water-cooled units (No. 29 manufactured by Tianjin Alstom). No.30 and No.30) and two evaporative cooling units (No.27 and No.28) manufactured by Dongfang Electric Corporation were all installed and commissioned by Gezhouba Group. Among them, No. 28 and No. 27 units adopt the self-developed stator winding self-circulating evaporative cooling technology independently developed in China. It is currently the world's largest evaporative-cooled hydro-turbine generating unit and has complete independent intellectual property rights. It is the result of the localization of China's giant hydropower equipment. The concentrated expression.

The stator core magnetization experiment of the No. 27 unit lasted for 90 minutes. The monitoring data showed that the voltage and the core temperature were very stable during the test, and the mechanical vibration was normal in all directions.

Contact Us

Author:

Mr. Jerry Zhu

Phone/WhatsApp:

+8615515501510

Popular Products
Industry News
Vent Spacer

April 21, 2023

Single Notching

April 19, 2023

Blog News
You may also like
Related Information
Aluminum casting technology

Through years of technical research and development and practical experience, Yongrong Power Co., Ltd. has developed a new set of cast aluminum manufacturing process, making its products in strength,...

Rotor Shaft Inserting

The rotor with shaft is a kind of widely developed and adopted motor design, also known as the magnetic pump rotor, compared with the ordinary motor, it adopts different design concept of the...

Progressive flushing is used in the production of stator and rotor

Progressive punching is an efficient self-riveting process of fixed rotor, which can realize large-scale and precise riveting operation and is suitable for mass manufacturing production line. The...

Laser Cutting Is Used In The Production Of Motor Stator And Rotor

Laser cutting provides greater precision in stator and rotor machining, using a highly focused beam that acts as a heat-affected zone during cutting without causing extensive thermal damage to...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Contact Us

Author:

Mr. Jerry Zhu

Phone/WhatsApp:

+8615515501510

Popular Products
Industry News
Vent Spacer

April 21, 2023

Single Notching

April 19, 2023

Blog News
We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send