-
Through years of technical research and development and practical experience, Yongrong Power Co., Ltd. has developed a new set of cast aluminum manufacturing process, making its products in strength,...
-
Laser cutting provides greater precision in stator and rotor machining, using a highly focused beam that acts as a heat-affected zone during cutting without causing extensive thermal damage to...
Oem Aluminum Die Casting Motor Parts
- manufacturer, factory, supplier from China(Total 8 Products for Oem Aluminum Die Casting Motor Parts)
-
Unit Price:1~1400USDBrand:YONGRONGPackaging:Wooden Case And Anti-rust BagSupply Ability:1540000Place of Origin:Henan, ChinaPROGRESSIVE PUNCHING Small size but large volume generator and motor lamination is very suitable to be produced in the progressive punching way, which can produce high quantities in a short period of time, even the complete stator & rotor cores.... -
Unit Price:1~9999USDBrand:YONGRONGPackaging:Wooden case, anti-rust bagSupply Ability:99999Place of Origin:ChinaROTOR CORE Rotor core stacking process is similar to the stator core stacking. Most motor rotor fabrication does not need welding techniques. After the rotor laminations are stacked, copper or aluminum circuits or permanent magnets will be embedded... -
Unit Price:1~1USDBrand:YONGRONGPackaging:Wooden Case And Anti-rust BagSupply Ability:1000000Place of Origin:Henan, ChinaROTOR CORE The rotor cores we currently produce are mainly cast aluminum rotors and copper rotors with shafts. The lamination stacking process of the cast aluminum rotor needs to use a high-precision mandrel during the lamination process, if the... -
Unit Price:1~1USDBrand:YONGRONGPackaging:Wooden Case And Anti-rust BagSupply Ability:1000000Place of Origin:Henan, ChinaVENT SPACER The fixed and rotor iron cores of large motor are divided into many overlapping segments, and the punch plate of spot welded ventilation channel steel is placed between the iron core segments, that is, the ventilation groove plate. Thus,... -
Brand:YONGRONGPackaging:Wooden case, anti-rust bagPlace of Origin:ChinaROTOR CORE The process of automatic lamination of the iron core is as follows: Punch out riveting points with a certain geometric shape on the appropriate parts of the stator and rotor punching pieces. Rotor core stacking process is similar to the... -
Unit Price:1~1500USDBrand:YONGRONGPackaging:Wooden Case And Anti-rust BagSupply Ability:999999Place of Origin:Henan, ChinaPROGRESSIVE PUNCHING Small size but large volume generator and motor lamination is very suitable to be produced in the progressive punching way, which can produce high quantities in a short period of time, even the complete stator & rotor cores.... -
Unit Price:1~1400USDBrand:YONGRONGPackaging:Wooden Case And Anti-rust BagSupply Ability:9999999Place of Origin:Henan, ChinaROTOR CORE Just like the stacking of the stator, the rotor lamination cannot deviate when it is pressed by the hydraulic press, otherwise the actual size of the rotor slot will change less than the design size, which will make the magnet or... -
Unit Price:1~1500USDBrand:YONGRONGPackaging:Wooden Case And Anti-rust BagSupply Ability:999999Place of Origin:Henan, ChinaHenan Yongrong Power Co., Ltd current production technology supports laser cutting for stator and rotor lamination production. LASER CUTTING Laser cutting is a processing method that uses a high-power laser beam to cut the workpiece. The laser beam...
Video
High Speed Punching Stator And Rotor Of Motor
Hot Seller Aluminum Die Casting For Starter Motor
Rotor Core By Aluminum Centrifugal Casting Factory
CHN Rotor Core With Ventilation Holes
Professional Making Of Stator Core About Motor Parts
Stator And Rotor For Explosion-proof Motor
Laser Cut Stator Laminations For Motors And Generators
Industry Information